Gate Hangings and Fastenings

We carry large stocks of gate hangings and catches for both timber and steel gates. All our products are supplied with a galvanised finish, unless otherwise stated. Please refer to the lists below for further information. If you can’t find what you’re looking for, please ring us. Not everything is listed.

Gate Hangings

  • Adjustable bottom gate fitting. 8″ eye bolt and 2 no. heel clips
  • Bottom band  5″ x 2″ x 1/4″ x 3/4″ eye
  • Bottom band  5″ x 2″ x 1/4″ x 1″ eye
  • Bottom band  5″ x 2″ x 1/4″ x 3/4″ offset eye
  • Bottom rocker self closing set
  • Cranked hooks and bands  12″
  • Cranked hooks and bands  18″
  • Cranked hooks and bands  24″
  • Cranked hooks and bands  30″
  • Cranked hooks and bands  42″
  • Eye to weld  3/4″ eye  self colour
  • Eye bolt 4″ x 3/4″ eye
  • Eye bolt 6″ x 3/4″ eye
  • Eye bolt 8″ x 3/4″ eye
  • Eye bolt 10″ x 3/4″ eye
  • Eye bolt 10″ x 1″  eye
  • Hanging set for timber gate
  • Hook on 4″ plate
  • Hook on 4″ plate, adjustable
  • Hook to bolt square 13″ with 3/4″ pin
  • Hook to bolt square 18″ with 3/4″ pin
  • Hook to bolt square with square welded washer 13″ with 3/4″ pin
  • Hook to bolt square with square welded washer 18″ with 3/4″ pin
  • Hook to build 9″ with 3/4″ pin
  • Hook to drive 8″ with 3/4″ pin
  • Hook for use with chemical resin 8″ x 5/8″ pin. Black finish
  • Hook for use with chemical resin 12″ x 3/4″ pin
  • Hook for use with lead  8″ x 3/4″ pin
  • Hook to weld, flat face 5/8″ pin. Self colour
  • Hook to weld, flat face 3/4″ pin. Self colour
  • Hook to weld, radiused face 3/4″ pin. Self colour
  • Scotch T hinges 8″
  • Scotch T hinges 12″
  • Scotch T hinges 18″
  • Strap hinges 12″
  • Top band 12″ x 2″ x 1/4″ x  3/4″ eye
  • Top band 18″ x 2″ x 1/4″ x  3/4″ eye
  • Top band 24″ x 2″ x 1/4″ x  3/4″ eye

Gate Fastenings

  • Brenton bolt 6″ x 5/8″ shoot
  • Brenton bolt 8″ x 5/8″ shoot
  • Chain. 4mm long link
  • Chain. 6mm long link
  • Cabin hook 6″
  • Drop bolt 12″ for timber gates
  • Drop bolt 18″ for timber gates
  • Drop bolt 12″ for timber gates. Lockable
  • Drop bolt 18″ Clamp on for galvanised gates
  • Drop over loop for timber gates 18″
  • Drop over loop for galvanised gates. Flat bar type
  • Drop over loop for galvanised gates. Large frame type
  • Easy latch for timber gates with straight handle
  • Easy latch for timber gates with trombone handle
  • Gate return spring
  • Gate closer, gas spring type
  • Gate safety hook
  • Hasp and staple with a brass pin 8″
  • Kick over latch for stable door
  • Large auto catch. No striker
  • Large auto catch kit complete with striker and coach screws
  • Large auto catch with lifting handle
  • Mortice latch for timber gates
  • New Zealand type gate catch
  • Oval pad bolt with 1/2″ shoot
  • Ring latch 6″ BZP
  • Ring latch 7″ Japanned
  • Ring latch 8″ Japanned
  • Screw eye 18 x 75
  • Small auto catch. Garden gate type
  • S hook 3″
  • Spring loaded bolt with 1/2″ shoot
  • Spring loaded bolt with 3/8″ shoot
  • Spring loaded bolt with 5/8″ shoot
  • Spring latch set with double leg staple
  • Square gate staple
  • Suffolk latch
  • Superloop for 75mm gates
  • Wrot staple 3″